Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

Target file has different time stamp to source

 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
jonhawksley



Joined: 05 Oct 2006
Posts: 1

PostPosted: Thu Oct 05, 2006 11:39 pm    Post subject: Target file has different time stamp to source Reply with quote

My source files are on a local drive and are NTFS
My target files are on a network using a Netgear SC101 containing a Hitachi Deskstar 250GB drive with an ATA Ultra 133 interface. The Viceversa program shows that the SC101 uses a DATAPLOW_ZFS file system.
The problem that I have is that all the zero length source files are given a 1982 timestamp when copied to the target directory irrespective of their source timestamp and for the rest some, but not all, of the target files are given a current time stamp rather than the time stamp in the source directory. Consequently a compare always reads these files as different and copies them all every time.
NB if I copy the source files to the target in windows explorer they show the correct timestamp.

The profile settings I am using are:
Folders
- Source: "C:\User\" (Archived)
- Target: "N:\user\" (Archived)
- Include Subfolders: Yes
Comparison
- Comparison Type: Size and Timestamp
- Ignore 2 seconds difference
Execution
- Method: Backup (Mirror Source to Target)
- Archive deleted/replaced source files to: "C:\ViceVersaArchive\"
- Archive deleted/replaced target files to: "N:\ViceVersaArchive\"
- Move files to archive folders (instead of copying)
- Archive max. 4 copies per file
- Remove archive copies older than 60 day(s)
- Append Source/Target path to archive folder(s)
- Speed: 100 Buffer Size: 32768 (flush the buffer every write)
- Copy files even if timestamp changes after initial comparison
- Copy directly to destination file (do not use a temporary file)
- Try to copy files that are in use by other applications
- Use 'Volume Shadow Copy' to copy open files for source
- Verify successful file copy by checking file CRC
- No empty source/target check
- Replace newer target files with older source files (backup only)
Regards
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8689

PostPosted: Fri Oct 06, 2006 2:16 am    Post subject: Reply with quote

Hi ,

It looks like VV is not compatible with your NAS, but we would like to debug this further. Could you please send your e-mail address to support@tgrmn.com so we can send you a special version of ViceVersa?

thank you!
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products: